l Italy HSD boring unit 5+4
l Double separate working table
l Maintenance free brushless AC servo motors and drivers
l Japan shimpo reducer coupled directly to servo motors
l Pneumatic material alignment stops
l 4-zone double-layer vacuum tables with 84 vacuum holes
l Hand-held pulse generator with rotary hand wheel controls the axis selected
l Open architecture works with all industry and standard CAD/CAM software
How it works:
NM-482BL CNC machine center has two separate working table. Once the sheet is placed in one of two tables, Then operator starts the cut cycle for the CNC to execute. During this time, the operator can work on the other working table, collecting finished parts then put a new one on this table.After machine finished,then it can start on this working table,then operator and work on finished working table. Thus the efficiency will be improved.
| Working size | 1220*2440*250mm |
| Table size | 1220*2440mm |
| Traveling size | 1320*2540*250mm |
| Spindle power | Italy HSD6.0 kw |
| Boring unit | Italy HSD 5+4 |
| Spindle speed | 0-18000mm/min |
| Driving system | Yaskawa servo / Delta servo |
| Reducer | Japan shimpo reducer |
| Operating system | Syntec / Delta / Osai |
| Max rapid | 45m/min |
| Max working speed | 25m/min |
| Transmission | Rack pinion and PMI linear rail for x y,ball screw for z |
| Table structure | double-layer vacuum table |
| Working voltage | AC220V/380V,50/60HZ,3PH |
| Software | cabinet vision / Katz-tech |
Links
